Start by selecting your lock in the app, and then tapping on the settings gear icon in the top-right corner of the screen.It’s a NEW YEAR, baby! You know what that means – the relentless march of death and misery continues apace, while I sit down and write some thoughts about every single videogame I have played in the previous year. In my case, I’m using the Wink hub, but if you use a different smarthome hub, the steps below should still be fairly similar. If you have your lock connected to a smarthome hub via Z-Wave, you can control the lock from your phone using the smarthome app of your hub, which will allow you to enable and customize the alarm from your phone. Once you’re happy, stop pressing the button and wait for it to set the sensitivity level. With each press, you’ll get one to five beeps and flashes that correspond to the sensitivity level. From there, you can press on the button again to cycle through the sensitivity levels (1 being the most sensitive and 5 being the least). If you want to change the sensitivity level of a particular alarm mode, first set it to the alarm mode you want and then press and hold down on the inside Schlage button until it flashes three times (about 10 seconds). Keep pressing the button until you get to the mode that you want to use. And when the right side lights up, it’s in Forced Entry mode. When the middle portion of the button lights up, the alarm is in Tamper mode. When the left side of the button lights up, the alarm is in Activity mode. Each button press will change the alarm mode. The alarm will default to using the Forced Entry alarm mode, but if you want to change which alarm mode is used, just press down the inside Schlage button again.
Forced Entry: 3-minute alarm shrill whenever the lock detects forced entry (kicking, hitting, etc.).Tamper: 15-second alarm shrill whenever the lock detects tampering (lock picking, etc.).Activity: Two short beeps whenever the door opens, regardless if the door is locked or unlocked.So before you go through the process of enabling the alarm, it might be a good idea to decide which alarm mode you want to use:
If you have the BE469, then read on!įirst, the Schlage Connect comes with three different alarm settings. To find out which model you have, you’ll need to take the inside mechanism off your door and look at the label on the inside. So make sure you check which model you have before attempting to enable an alarm that may not even have. There are very few differences between either as far as features are concerned, but one big difference is that the BE469 comes with the alarm, while the BE468 does not. The former is discontinued, and the latter is the newest, updated model.
#My keywe smart lock forced entry notification how to#
RELATED: How to Install and Set Up the Schlage Connect Smart Lockīefore we continue, it’s important to know that there are two different models of the Schlage Connect: the BE468 and the BE469.
0 kommentar(er)
